Tropica plant growth system nano up to 200 L

• Contains 95 g disposable bottle and smart 3-in-1 diffuser

• Easy to adjust right down to 1 bubble per minute

• Lasts up to 10 months for a 30 L aquarium

Properties and application in use of the product

1. Check that the regulator is completely closed and mount the regulator on the CO2 cylinder.

2. Fill the chamber of the diffuser with water.

3. Place the cartridge in the holder and mount the hose on the regulator and on the diffuser.

4. Mount the diffuser with the suction cups on the inside of the aquarium close to the bottom and so that the hose runs in a corner at the back of the aquarium.

5. Let the diffuser sit for 24 hours in the aquarium, so that the ceramic disc is well moistened before you open the CO2 supply.

6. Slowly open the regulator and count the number of bubbles in the chamber of the diffuser.

7. Wait 2 minutes and fine-tune and repeat until the number of bubbles is approx. equal to the recommendation in the table.

View full description