Helialux Splitter LED (2ch)

Adapter for HeliaLux LED-enheder

Denne Helialux Splitter LED (2ch) er designet til at drive to HeliaLux LED-lys via HeliaLux SmartControl. Den er den ideelle løsning til dem, der ønsker at udvide belysningen i deres akvarium og styre flere enheder via ét kontrolsystem.

Funktioner:

  • Splitter/adapter til HeliaLux LED: Tilslut to HeliaLux LED-enheder til HeliaLux SmartControl.

  • Højkvalitets materialer: Fremstillet af robuste og holdbare materialer for langvarig pålidelighed.

  • Nem installation: Enkel at montere takket være det brugervenlige tilslutningssystem.

  • Sikker og vandtæt: De vandtætte sikkerhedsfunktioner overholder de højeste sikkerhedskrav for ekstra tryghed.

  • Praktisk løsning: Gør det muligt at betjene flere lyskilder via én kontrolenhed.

Opgrader din HeliaLux-belysning og få nem kontrol over dit akvariums belysning med denne effektive splitteradapter.

Køb Helialux Splitter LED hos PetShopDanmark for nem installation og pålidelig drift af din belysning!

219,00 DKK

This power supply for Lumax LED luminaires from Akvastabil fits all Lumax LED luminaires with 23 Watt, 29 Watt and 38 Watt. In addition, 1 Lumax LED luminaire with 38 Watt or 2 Lumax LED luminaires with 23 or 29 Watt can be connected to this power supply using a y-splitter cable.

Lumax LED luminaires have been specially developed for use with the Move and Fusion aquariums from Akvastabil and the luminaires fit the dimensions of these aquariums. Since power supplies are not included with the luminaires, it is necessary that you purchase them separately. This also applies to the y-splitter that you use to connect several fixtures to the same power supply.

As the design of Lumax LED luminaires allows space for several luminaires in the lid of the Move or Fusion aquarium, it may be necessary to purchase several power supplies for your aquarium.

Key benefits:

  • Can be connected to LED luminaires with 23 Watt, 29 Watt and 38 Watt
  • Can be connected to 2 LED luminaires with 23 or 29 Watts using a y-splitter cable (splitter purchased separately)

ATTENTION: Do not connect fittings with more powerful Watts than mentioned above, as this can damage both the power supply and the fitting.

Price from
299,00 DKK

Do you have an Akvastable Move aquarium or perhaps an Akvastable Fusion aquarium? Then you must also have an Akvastabil Lumax LED fixture, which has been developed especially for use with the Move and Fusion aquariums from Akvastabil.

Akvastabil's Lumax LED fixture has a slim design that makes it easy to place under the aquarium's lid. If you have a large need for light, there is also room for you to place many luminaires next to each other. Akvastabil's Lumax LED luminaires are available in four different color combinations, so you can find the lighting combination that suits you best.

Akvastabil's Lumax LED fixtures are 100% waterproof, as all diodes and electrical connections are protected by a layer of clear silicone.

When you buy an Akvastabil Lumax LED luminaire, a power supply is not included. This must therefore be purchased separately and is available in different sizes.

The Akvastabil Power Supply for Lumax, which you are looking at here, fits Akvastabil Lumax LED luminaires on or 23 watts and 29 watts. One Akvastabil Lumax LED luminaire can be connected to this power supply.

Important benefits

  • Aquastable Power Supply for Lumax
  • Suitable for Akvastabil Lumax LED luminaires on or 23 watts and 29 watts
  • One Akvastabil Lumax LED luminaire can be connected to this power supply
169,00 DKK

This LED AQUASTABLE LUMAX CONTROLLER is used to adjust the amount of light in your aquarium. With the controller, you can simulate sunrise and sunset, moonlight and cloud formations in the aquarium, so that your fish and plants get a lighting environment that is as close as possible to the natural environment they originally come from.

The controller can be set with times, so that the light is regulated completely automatically and you don't have to think about turning the light on and off in the aquarium.

LED Controller for LUMAX only fits together with LUMAX LED rails. The controller can control up to 2 rails. It is important that you choose the right power supply. If 2 x 45 watt LED rails are to be connected, the power supply must be at least 96 watts

There are the following five possible programs:

1. Sunrise and sunset. The fixture is completely switched off at night. Sunrise and sunset last approx. 30 minutes.

2. Turn clock on/off. There is no sunrise or sunset, or clouds and moonlight.

3. Sunrise and sunset, moonlight at night and cloud simulation during the day.

4. Sunrise and sunset with cloud simulation during the day. Turned off at night.

5. Sunrise and sunset and moonlight at night.

799,00 DKK
FREE shipping!

Akvastabil Lumax LED luminaires have been developed especially for Akvastabil Move and Fusion aquariums. Akvastabil Lumax LED luminaires thus fit 100% of the dimensions for these aquariums. As power supplies are not included with the fixtures, it is necessary that you purchase them separately. Akvastabil Lumax LED luminaires have a very slim construction, which makes it easy to place the LED luminaire under the aquarium lid. Akvastabil Lumax LED luminaires are available in five different LED color combinations, so you can easily find a combination that suits you. Akvastabil Lumax LED luminaires are 100% waterproof, as all diodes and electrical connections are protected by a fine layer of ultra-clear silicone. The clear plastic sheet that covers the diodes is not tight, but simply provides additional protection against water splashes and makes it easier to keep the fixture clean.

If you have a large need for light (for example if you have many plants in your aquarium), there is room for many fixtures next to each other due to the slim construction. If you want this, however, you must use a so-called y-splitter cable from Akvastabil, so that you can connect several fittings to the same power supply. This y-splitter cable fits all Akvastabil Lumax LED luminaires.

With a Lumax LED controller you can adjust the amount of light, create sunrise/sunset and get moonlight in your aquarium at night.

Important benefits

  • Y-splitter cable
  • Fits all Akvastabil Lumax LED luminaires
  • Makes it possible to connect several luminaires to the same power supply.
49,00 DKK

The white fixture has a very high light output of approx. 120 lumens/W and is among the most energy-efficient aquarium lighting on the market.

The slim design makes it easier to place the LED fixture under the aquarium lid. If you have a large need for light, there is also room for many luminaires next to each other. It is therefore a great advantage that LUMAX is available in 4 different LED color combinations, so you can easily find a combination that suits you. Available in the colors PLANT, white, white/blue and pure blue. The lengths are adapted to MOVE and FUSION.

The fixture is 100% waterproof, as all diodes and electrical connections are protected by a layer of ultra-clear silicone.

  • Developed for the MOVE and FUSION aquariums from Akvastabil
  • The fixture is 100% waterproof
  • Easy to place under the aquarium lid
  • Lengths adapted to MOVE and FUSION

ATTENTION! Power supply is not included and must be purchased separately.

Price from
499,00 DKK
FREE shipping!

The white fixture has a very high light output of approx. 120 lumens/W and is among the most energy-efficient aquarium lighting on the market.

The slim design makes it easier to place the LED fixture under the aquarium lid. If you have a large need for light, there is also room for many luminaires next to each other. It is therefore a great advantage that LUMAX is available in 4 different LED color combinations, so you can easily find a combination that suits you. Available in the colors PLANT, white, white/blue and pure blue. The lengths are adapted to MOVE and FUSION.

The fixture is 100% waterproof, as all diodes and electrical connections are protected by a layer of ultra-clear silicone.

  • Developed for the MOVE and FUSION aquariums from Akvastabil
  • The fixture is 100% waterproof
  • Easy to place under the aquarium lid
  • Lengths adapted to MOVE and FUSION

ATTENTION! Power supply is not included and must be purchased separately.

Price from
499,00 DKK
FREE shipping!

The Lumax fixture is produced in such a way that it makes it easy to place the LED fixture under the aquarium lid. If you have an aquarium that needs a lot of light, luckily there is also room for several fittings next to each other.

Luminaires from the LUMAX series can be customized with four different LED color combinations, so you can easily find a combination that suits you. The LED tubes can be purchased in PLANT, white, white/blue and pure blue. The lengths are adapted to MOVE and FUSION.

All Lumax fixtures are completely waterproof, as all diodes and electrical connections are protected by a layer of ultra-clear silicone.

This Lumax fixture has a very high light output of approx. 120 lumens/W and is among the most energy-efficient aquarium lighting on the market.

The PLANT luminaire has diodes in different colours. There is both white, red, blue and a specially adapted warm white. This color combination ensures a very high color fastness and plenty of light in the red spectrum. With the combination of the blue and red light, the amount of yellow and orange light is reduced. This color reduction suppresses the experience of yellow water in the aquarium.

Price from
549,00 DKK
FREE shipping!

The white fixture has a very high light output of approx. 120 lumens/W and is among the most energy-efficient aquarium lighting on the market.

The slim design makes it easier to place the LED fixture under the aquarium lid. If you have a large need for light, there is also room for many luminaires next to each other. It is therefore a great advantage that LUMAX is available in 4 different LED color combinations, so you can easily find a combination that suits you. Available in the colors PLANT, white, white/blue and pure blue. The lengths are adapted to MOVE and FUSION.

The fixture is 100% waterproof, as all diodes and electrical connections are protected by a layer of ultra-clear silicone.

  • Developed for the MOVE and FUSION aquariums from Akvastabil
  • The fixture is 100% waterproof
  • Easy to place under the aquarium lid
  • Lengths adapted to MOVE and FUSION

ATTENTION! Power supply is not included and must be purchased separately.

Price from
499,00 DKK
FREE shipping!
To Top